[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: ssh on 1.9.1
Thanks, I actually was able to figure that out on my own earlier today and
now my ssh server is working great :)
Jason
On Mon, 28 May 2001, Roger Micone wrote:
> you may need to edit you /etc/hosts.allow file to login from the outside. if it is set at ALL:ALL than anyone can login if they have a login & password. Add the hostname of the machine you are trying to reach it from and see if that works.
> On Sun, May 27, 2001 at 02:46:31PM -0400, Jason Collison wrote:
> > Ssh comes with libranet 1.9.1 and I'm trying to get it to work in server
> > mode. I'm using the default setup that where sshd is started at
> > boot. Currently though, there is something wrong with my setup. If I ssh
> > to my own IP address from within the machine, I can login (or to be more
> > precise, login again) to the system, but I can't seem to access the system
> > from a remote site. I'm not sure if there are files that need to be
> > changed (like inetd or hosts.allow....both of which I know very little
> > about) or if its a problem with my firewall (though I told the firestarter
> > wizzard to allow connections to port 22 from all sites). Any ideas as to
> > what I need to do? All I have done so far is installed sshd when I
> > installed the system (and it is running), and I opened (or at least I
> > think I opened) the firewall up to accept ssh connections at port 22.
> >
> > Thanks
> >
> > Jason
> >
> >
> > --
> > The archive is at https://www.libranetlinux.com/archive.html
> > To unsubscribe, send email to [email protected]
> > with a subject of UNSUBSCRIBE.
>
> --
> The archive is at https://www.libranetlinux.com/archive.html
> To unsubscribe, send email to [email protected]
> with a subject of UNSUBSCRIBE.
>
--
The archive is at https://www.libranetlinux.com/archive.html
To unsubscribe, send email to [email protected]
with a subject of UNSUBSCRIBE.