[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Silencing the scream
On Thu, Jan 03, 2002 at 05:53:13PM -0400, rod wrote:
> What do you use to dial up? Pon, kppp ?. Check your modem init string.
> Try adding L0 to set the volume off or M0 to turn off the speaker
> (that's a zero) to the string. My modem string is AT&FS95=47W2. This
> displays the correct connection speed and not the actual port speed. For
> instance my port is set to 57600 but my present actual connect speed is
> 45333. If this works for you (may cause problems) then add the L0 or M0
> or both. Play with it.
>
> Rod
I typically use pon. Pardon me, but I don't even know where to find my modem init string! You're dealing with a rank newbie here. Once I find the modem init string, would I add the L0 or M0 at the end of the string, or would it matter?
And when you say that your modem string displays the connection speed, where does it display it?
--Mark
--
--
The archive is at https://www.libranetlinux.com/archive.html
To unsubscribe, send email to [email protected]
with a subject of UNSUBSCRIBE.